cinemasetfreeAdding a LoRA
Pick an image model that takes LoRAs, open LoRA Integrations and paste in the LoRA’s address. A slider sets how strong it is.
Add a LoRA to a design
Open the design
On the Designs tab, press Edit on the design and go to the Image tab.
Pick a model that takes LoRAs
Search the Image Model box. For example, black-forest-labs/flux-dev-lora takes them. The LoRA Integrations button appears once you pick one.
Open the LoRA window
Press LoRA Integrations. The LoRA / Integrations window opens for that model.
Paste the LoRA
Paste its address into LoRA Weights. The links under the box open the LoRA lists on Replicate, CivitAI and Hugging Face.
Set the scale
Drag LoRA Scale to set how strongly it applies.
Save both
Press Save in the window, then Save in the design editor so the design keeps the new model.
Replicate, Hugging Face, CivitAI or a direct link
| Where it’s from | What to paste |
|---|---|
| Replicate | owner/model, or owner/model/version |
| Hugging Face | huggingface.co/owner/model |
| CivitAI | civitai.com/models/12345 |
| Direct | Any link to a .safetensors file |
On Hugging Face and CivitAI, check which base model a LoRA was trained for. It has to match the image model you picked.
How strong to make it
LoRA Scale sets how much the LoRA changes the picture. The model’s own note says values between 0 and 1 give sane results. Start near the top of that range and lower it if the pictures start to look alike or lose the design’s style. If a LoRA does nothing at a normal scale, try a different LoRA before you push the number up.
Using two at once
Some models also have an Extra LoRA box, so you can use two. The second one’s strength is Extra Lora Scale, which is in the design’s Advanced Settings. Their effects add up, so turn each one down a little. Pair LoRAs that do different jobs, like one face and one style. Two faces, or two styles, tend to blur together.
What the window shows
Every model offers different fields, so the window only shows the ones the chosen model has. A model with none says “This model has no LoRA/integration parameters.” Reset to Defaults clears your changes. Your settings are saved for that model in that design.
Still stuck?Ask in the Discord